1. The touch screen PLC is used for control, with two modes of this control and PC control, and the corresponding upper computer operating software is provided. 2. Inductive, capacitive, resistive load power can be arbitrarily combined, resistive 0.001KW ~ to high power adjustable, inductive 0.001KW ~ to high power adjustable, capacitive 0.001KW ~ to high power adjustable. Meet the three-phase voltage imbalance under the condition of precise adjustment of the AC resonance point. 3. According to the performance parameters detection requirements, can be through the operation panel, any combination, set the discharge power. 4. Simulate the resonance of AC electrical equipment to effectively and accurately detect the anti-islanding protection function of grid-connected inverter. 5. Test the working efficiency of various inverters, full load operation to large output power and load capacity. 6. Simulate all kinds of complex working environment and detect the comprehensive working performance of the inverter in various environments. 7. Resonance test: set inductive power consumption = capacitive power consumption, resonance in theory, inductive capacitive reactive power offset each other, reactive power = 0. 8. The minimum resolution of resistive load, inductive load and capacitive load is 1W, which can accurately simulate the occurrence of AC resonance and meet the needs of inverter debugging and testing. 9. It can measure a variety of data to meet the needs of inverter testing, including: resistive current, inductive current, capacitive current, voltage, current, frequency, power, apparent power, reactive power, voltage total harmonic, current total harmonic, power factor and voltage waveform. It can upload the measured data to the PC and realize the function of recording and storing the process data of the detection process. 10. The measurement data can be uploaded to the computer and the process record storage function of the detection process data can be realized.
What is the use of gold aluminum shell resistor? Gold aluminum shell resistor has stable performance and low resistance value. Gold aluminum shell resistor uses ambient temperature:-55 ℃ ~ +170 ℃; Accuracy range: 5%, 2%, 1%. Gold aluminum shell resistance through to change its own resistance, so as to play the role of control circuit, in the circuit analysis, gold aluminum shell resistance can be used as a constant value resistance, but also as a variable value resistance. Gold aluminum shell resistors are made of nickel and chromium, alloy resistance wire wound on alkaline heat-resistant porcelain pieces and other high resistance, external heat, humidity, no corrosion and protective materials, ceramic packaging again, especially non-flame cement filler sealing. At present, the demand for gold aluminum shell resistors in the market is slowly expanding.
At present, new energy products are a trend in research and development, and the test dry load of Fude new energy generator sets came into being under this trend.
Our company is ABB's new energy vehicle charging pile test load box, which is used for the load test equipment of electric vehicle charging pile and has been transported to the buyer for acceptance and put into use.
Recently, the intelligent test load box designed and manufactured by Rist Company for a new energy vehicle DC fast charger in Shenzhen was officially put into use. Through the information exchange between the load box and the DC fast charger of the electric vehicle, the real-time simulation of the battery charging process is realized.
The equipment for the 2000KV load intelligent test system.
1. The resistance core adopts high temperature resistant ceramic flat tube, and the basic size of ceramic is determined according to the shell size. 2. The resistance wire is uniformly wound with high-quality electric heating alloy wire, and the grade and model of the alloy wire are determined according to the resistance value. 3. Sealing material: both ends are sealed with water sediment resin slurry (electronic insulating material), and aluminum plate is used to press the seal when the cement material is semi-dry, so that the aluminum plate and the cement material are integrated to prevent sand leakage. 4. Shell: High-quality industrial 6063 aluminum is used. The aluminum shell is anodized into fog silver. Sandblasting or wire drawing can also be used according to customer needs. 5. The outgoing line adopts UL AWM3122 white textile silicone rubber high temperature line (conventional temperature resistance 200 degrees, the highest temperature resistance 250 degrees)